Fix broken LibreElec on Raspberry Pi after auto-update (could not mount /flash/SYSTEM)

Mount the SD card on Windows or Linux.
Grab the latest LibreElec image file from https://libreelec.tv/downloads/
Extract the kernel.img and the SYSTEM files from the downloaded file.
Replace the existing kernel.img and SYSTEM files on the SD card with those two files.

Put back the SD card in the RPi and all should be fine.

#1

Comments

Bozzy said…
Is this a serious risk with auto updates? Seems to defeat the point if so.
25 May 2020 at 16:17
Unknown said…
Worked thank you helped me a lot :)
13 September 2021 at 13:52
Post a Comment

Popular posts from this blog

Resolve "Cannot download packages whilst offline" issue in Deja-Dup backup software

If you got the error message "Cannot download packages whilst offline" but your internet connection is active, this is probably because you've managed the network configuration yourself and the network manager is reporting an offline status even if it's not correct. To fix this issue, simply edit the file /etc/NetworkManager/NetworkManager.conf and change the following configuration to be inline with: [ifupdown] managed=true Then restart the Network Manager : sudo service NetworkManager restart #1
Read more

ubuntu 20.04 / netplan / change mac address and static ip

I wasn't able to set together a virtual mac address and a static IP using netplan: either the mac address didn't change, or IP was not set. I finally got the trick using a fake nic definition that matches the new virtual mac address I've set.    network:   renderer: networkd   ethernets:     ens160:       match:         macaddress: 00:0c:29:5a:69:00       macaddress: 00:50:56:0c:de:a6     ens160_2:       match:         macaddress: 00:50:56:0c:de:a6        addresses: [ 139.99.5.72/32 ]       nameservers:         addresses: [ 8.8.8.8 ]       routes:       - to: 0.0.0.0/0         via: 139.99.5.254      ...
Read more

Connect the Xiaomi Yi Ants Cam to your Synology Surveillance Station

1) Ensure the current firmware of your cam allows you to see the steam without authentication. You can check this using vlc and connecting to rtsp://192.168.1.128:554/ch0_0.h264 If you are able to see the stream, you can go to the next point. Otherwise you have to downgrade the firmware of your cam : Simply place this file on the root of an SD card, insert the SD card in the cam and reset it (a reboot may be sufficient) 2) Create the following file on your synology using putty /volumeX/@appstore/SurveillanceStation/device_pack/camera_support/Xiaomi.conf with this content: [Xiaomi*Ants] api = custom resolution_h264 = 1280x720 default_resolution_h264 = 1280x720 fps_h264_640x480 = 5,10,15,20,25,30 fps_h264_1280x720 = 5,10,15,20,25,30 default_fps_h264_1280x720 = 10 default_image-quality = 5 h264 = rtsp mpeg4 = rtsp mjpeg = rtsp motion = h264,mpeg4,mjpeg motion_param = sensitivity,threshold rtsp_keepalive = none rtsp_protocol = auto,udp,tcp 3) In the surveillanc...
Read more